Previous
Next
AllorA spray filler 83-10

Ordering is only possible for registered users!
- Order number: T014944
AllorA spray filler 83-10 (spray plastic) for application with the paint spray gun (SATAjet... more
Product information "AllorA spray filler 83-10"
AllorA spray filler 83-10 (spray plastic) for application with the paint spray gun (SATAjet 100 nozzle P or min. 2.2Â mm).
Description:
2K polyester filler for easier levelling of large uneven surfaces.
Properties:
- Very high filling capacity
- Easy to work with, good uniformity
- Quick-drying
- Suitable for use on blank steel plate, epoxy primer or fully cured/solvent-resistant
old paint coats
Surface preparation:
Thoroughly sand the surface, then clean and degrease with a suitable silicone remover.
The product must only be used on:
- Steel plate
- Polyester filler
- Epoxy primer
- Solvent-resistant/fully hardened old paint coats
Caution: Do not use directly on wash primer or acid-treated areas, galvanised steel,
aluminium, 1K acrylic or nitro cellulose products.
See datasheet for handling
Contents: 1 kg + 50 ml hardener
Related links to "AllorA spray filler 83-10"
Einordnung nach CLP-Verordnung
Symbole |
| ||||||
Signalwort | Danger! | ||||||
H-Sätze | H226: Flammable liquid and vapour H315: Causes skin irritation H319: Causes serious eye irritation H332: Harmful if inhaled H361d: Suspected of damaging the unborn child. H372: Causes damage to organs ( state all organs affected, if known) through prolonged or repeated exposure (state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard) |
Hint!
Content 100 Sheet (€0.25 * / 1 Sheet)
From €24.91 * €27.37 *
Hint!
Content 100 Sheet (€0.21 * / 1 Sheet)
From €20.69 * €28.74 *
Hint!
Viewed