AllorA AR100 special cleaner rim and rust film cleaner

Highly effective, acidic special cleaner for rims/vehicle detailing. High-quality surfactants that are over 95% bio-degradable form the basis for material-friendly rim cleaning in the professional and consumer sector.

Properties:

• Effortlessly removes stubborn grease, oil and brake abrasion residue
• Quickly removes caked on road grime
• Innovative vaporising inhibitors for maximised surface protection
• Excellent corrosion protection
• Surface passivation
• Easy rust film removal
• Ideally suited for the cleaning of tiles and hall floors (effective with extreme soiling)

Application:

Dilute with water at 1:1 to 1:10 depending on the degree of soiling. The product can be applied undiluted on pre-moistened rims or as a 1:3 dilution. Dilute at 1:1 to 1:5 for dry rims.

Apply AllorA AR100 with the relevant dilution ratio on dry or pre-moistened rims/tiles. Leave to activate (max. 1–2 min.) Then rinse thoroughly with a strong water jet.

Remove any remaining stubborn dirt with a brush or sponge. Rinse all residue from the rim thoroughly; pay special attention to valve ports and brake disks. Brake test is required. Overly frequent use and insufficient rinsing may result in valve leakage.

Anodised and non-painted alloy rims may react to improper use with discolouration. Our guarantee is limited to consistent quality. Use only in accordance with the product description.

Caution: Do not apply the AR100 special cleaner to polished/high-gloss rims or chrome rims!

Contents:

1 l or 10 l